Project Your Device Screen Wirelessly

Applicable products： HUAWEI nova 9(dual sim card 8gb+128gb)
Applicable products：
zoom in pic
Project Your Device Screen Wirelessly

Project your device wirelessly to stream films and work on a bigger screen (such as a TV).

Different display devices support different projection protocols. Therefore, the projection method may vary. Choose a suitable method based on the protocol supported by your device.

For details about the supported projection protocols, refer to the product manual or contact the product manufacturer.

  1. Ensure that the DVKit/Cast+/Miracast switch or the projection switch is enabled on the display device. For details about how to turn on the switch, refer to the product manual or contact the product manufacturer.

  2. Swipe down from the upper right edge of your device to display Control Panel and touch .

  3. In Control Panel, touch to expand the shortcut switches panel (depending on your device model), then touch Wireless Projection. Your device will then start searching for available external displays.

    You can also go to Settings > More connections > Easy Projection or Settings > More connections to enable Wireless Projection(depending on your device model).

  4. Touch the device that you want to project your device to from the detected devices.

By default, after the connection is successful, banner notifications for incoming calls, messages, and alarms, and Multi-Window are only displayed on your phone instead of the external display. To show notifications on the external display, touch and turn off the switch for Hide notifications.

To exit wireless projection, go to > Disconnect .

Helpful or not?
Yes No
Thanks for your feedback.