Disabling Wi-Fi on a HUAWEI CPE

Applicable products： HUAWEI 4G Router 2，HUAWEI AI Cube，HUAWEI 5G CPE Pro 2，HUAWEI 4G Router 2s，HUAWEI 4G CPE 5s，HUAWEI 4G Router 3 Prime，HUAWEI 4G Router 3 Pro，HUAWEI 4G CPE 5，HUAWEI 4G CPE Pro 2，Soyealink 4G CPE 3s，Soyealink 4G CPE 3，Soyealink 4G CPE Pro 3，HUAWEI 4G Router Lite，HUAWEI 4G CPE 3，HUAWEI 4G Router 2 Pro，HUAWEI 5G CPE Pro
Applicable products：
Inquriy result as below, please select
Can't search result, please select again
zoom in pic
Disabling Wi-Fi on a HUAWEI CPE
 
  • Wi-Fi is enabled by default on HUAWEI CPEs.

  • Connect your computer to the LAN port of the CPE using a network cable, and then log in to the management page to enable Wi-Fi. It is recommended that you keep Wi-Fi enabled.

  • After the CPE is restored to factory settings, Wi-Fi is automatically enabled. However, all configuration parameters are cleared after the restoration. In this case, you will need to set the parameters again.
  1. Connect your phone or computer to the CPE's Wi-Fi (or connect your computer to the CPE's LAN port using a cable). Enter 192.168.8.1 in the address box of the browser, and enter the login password to access the management page of the CPE.
  2. Go to Wi-Fi Settings > Wi-Fi Basic Settings, check Wi-Fi, then click OK in the displayed dialog box to disable Wi-Fi.
Helpful or not?
Yes No
Thanks for your feedback.