Disconnecting and Reconnecting a watch to the same or different Android/Huawei device
Disconnecting a watch and rconnecting it to an Android/Huawei phone device which uses the same Huawei ID
Disconnection can be done in two ways: through the Huawei Health app or directly from the watch side.
Disconnecting via Huawei Health:
1. Go to Huawei Health app
2. In Huawei Health app click the device tab
3. In the device tab click “: :”
4. Click “Unpair device”
The watch will remain on the watch face screen, and no paring screen will be shown on it
Reconnecting via Huawei Health:
1. Go to Huawei Health app
2. In Huawei Health app click the device tab
3. In the device tab click “: :”
4. Click “Add device”
5. Choose the device you want to reconnect to
6. Click “Connect”
7. Phone device will display – “Bluetooth message syncing”
8. Phone device will display – “Confirm paring on wearable device”
9. The watch will display paring request
10. Click – accept
Note: If you see the watch face (as on below screen), but you’re unable to reconnect, please follow the procedure below to trigger the pairing screen.
Disconnecting via Watch:
1. Go to Watch Settings
2. Find “System& Updates”
3. Click “Disconnect”
4. ℹ️Action will trigger the return to the paring screen.
On Watch 5 and Watch GT6 option connect new device will also trigger the paring screen.
Reconnecting back via Huawei Health:
1. Go to Huawei health app
2. Navigate to device tab
3. Find your device
4. Click “Reconnect”
5. Status – “Connected” will be displayed in the device tab
Disconnecting the watch and reconnecting it to another Android/Huawei phone device which uses a different Huawei ID.
ℹ️If you are reconnecting the watch to a different phone using a different Huawei ID, actions will be required on both the Huawei Health app and the watch. Factory reset is required in this case.
Disconnecting the Watch – factory reset:
1. Go to Settings on watch device
2. Scroll down to “System& Updates” and click it
3. Find “Reset”
4. Accept pop-up – “Resetting will erase all your data. Reset?”
5. Follow the steps from (link: Paring guide) to connect the new device.
