Expedition

Applicable products： HUAWEI WATCH | ULTIMATE DESIGN，HUAWEI WATCH Ultimate
Applicable system: Unrelated to OS version
Applicable products：
Applicable system:
The following are the search results, Please select
Unable to find the result, Please select again.
zoom in pic
Expedition

When you're on an outdoor expedition, you can mark your locations and use these marked locations to find your way back. You can also use the watch to get key data like altitude and SpO2.

The Expedition mode will be supported via OTA updates.

Settings

  1. On the watch face screen, press the Assist button on the watch to access the Expedition screen.
  2. Touch at the bottom.
    • Battery: The Raise to wake outdoors feature is enabled by default. You can toggle off the switch to disable it. You can also touch Positioning interval to set Time or Steps.
    • Storm warning: You can choose to enable or disable Warnings. When it is enabled, you can set Pressure drop.
    • Record at night is enabled by default, and you can toggle off the switch to disable it.
    • Dim after sunset is enabled by default, and you can toggle off the switch to disable it.

Starting an outdoor expedition

  1. On the watch face screen, press the Assist button on the watch to access the Expedition screen, then touch Start.
  2. During the expedition:
    • Waypoint distance: Waypoints are the important locations marked through positioning technologies, like a crossroad and a medical service station. Waypoint distance is the sum of the distances of the waypoints connected in a straight line.
    • Mark: On the home screen of Expedition, press the Down button or touch Mark to manually mark a location. Touch Markers to view and edit the marked locations.

      Markers only count the number of manually marked locations.

    • Dim: On the home screen of Expedition, press the Assist button on the watch to enable or disable Dim mode.
    • Tools: On the home screen of Expedition, swipe down on the watch screen to access Tools, like SpO2 and Torch.
    • Lock screen/Unlock screen: On any screen of Expedition, press the Up button on the watch to lock or unlock the screen.

      Touch Home screen to halt the recording of expedition data. You can resume this expedition by opening the app again and touching Resume.

  3. On the home screen of Expedition, swipe down on the watch screen twice to go to the route back screen. Touch Backtrack to navigate to a place near the starting point.

    Touch Navigate to display the marked locations, rotate the Up button to switch between marked locations, and press the Up button to select a marked location. Touch Navigate to navigate to a place near the marked location.

  4. Press and hold down on the Up button on the watch to end the outdoor expedition.

Viewing expedition records

On your watch:

  1. Press the Assist button on the watch to access the Expedition screen, and touch Expedition records to display the expedition records.
  2. Touch the expedition record you wish to view, and swipe up or down on the screen to view detailed records like Distance, Altitude, and Avg heart rate.

On your phone:

Open the Huawei Health app, go to Health > Exercise records, and touch expedition records to view the details.

Helpful or not?
Yes No
Thanks for your feedback.