You can use the H button to enable WPS function and HiLink. The H button allows you to connect smart home devices that support HiLink to the Wi-Fi network of the router with a single button press in order to build a distributed smart home network with automatic hotspot switching and wider signal coverage. You only need to use one mobile app to manage all smart home devices within this network.

To achieve this, perform the following:

• HiLink: Place a new or factory settings-restored HiLink smart home device within 1 meter from the router and connect the device to the power supply. Check the indicator on the router. The indicator should flash slowly after 1 minute. Press and release the H button. The indicator will begin to flash more quickly. Wait for about 10 seconds until the indicator is steady on. The smart home device is now connected to the Wi-Fi network of the router.
• WPS: When the indicator is steady on, press the H button on the router and on other Wi-Fi devices (for example, your phone) within two minutes to enable the standard WPS negotiation and connect the Wi-Fi devices to the Wi-Fi network of the router.