Enable or disable the data service
Applicable products： HUAWEI 4G Router 2，HUAWEI AI Cube，HUAWEI 5G CPE Pro 2，HUAWEI 4G Router 2s，HUAWEI 4G CPE 5s，HUAWEI 4G Router 3 Prime，HUAWEI 4G Router 3 Pro，HUAWEI 5G CPE Win，HUAWEI 4G CPE 5，HUAWEI 4G CPE Pro 2，Soyealink 4G CPE 3s，Soyealink 4G CPE 3(（b535-333）、（b535-933）、4g cpe 3)，Soyealink 4G CPE 3，Soyealink 4G CPE Pro 3，HUAWEI 4G Router Lite，HUAWEI 4G CPE 3，HUAWEI 4G Router 2 Pro，HUAWEI 5G CPE Pro
Applicable system: Unrelated to OS version
Applicable products：
Applicable system:
zoom in pic
Enable or disable the data service

By default, the data service function is enabled for the CPE. After the CPE registers for the Internet, it automatically initiates a dial-up connection. You can manually disable this function and manually enable it when you need to access the Internet.

  1. Connect your computer to the CPE's Wi-Fi (or to the CPE's LAN port using an Ethernet cable). Enter 192.168.8.1 in the address box of the browser, and enter the login password to access the management page of the CPE.
  2. Go to Network Settings > Mobile Network > Internet Connection. Disable the Mobile data switch to disable the data service. In this case, the CPE will disconnect from the network.

  1. When you need to access the Internet, turn on the Mobile data switch to enable the data service. The CPE will re-initiate a dial-up connection.

Helpful or not?
Yes No
Thanks for your feedback.