Measure the wrist circumference and select a strap and airbag
Applicable products：
Search reslt, please select
No search result, please select
| Measure the wrist circumference and select a strap and airbag |
Measuring your wrist's circumference and selecting a suitable strap
- At a position on your wrist that is about the width of two fingers away from the bottom of your palm, put the end of the ruler that comes with the watch through the buckle on the head.
- Pull the ruler until it touches your arm, but don't pull it too tightly. Record the position indicated by the arrow.
- Select the strap and airbag based on the scale value.
Replacing the strap and airbag with ones in suitable sizes
- Open the strap nail buckle and the upper and lower buckles of the airbag.
- Press the cover button and pull up the airbag to separate the airbag cover from the body of the watch.
- Push the lever inwards and pull the strap outwards.
- Align one side of the strap to be installed with the watch body, push the lever inwards, and fasten it.
- Align the airbag with the air nozzle and press the airbag cover.
- Align the end of the strap with the buckle and insert the strap into the buckle.
- After adjusting the tightness, fasten the airbag buckle.
Adjust the strap based on your wrist's circumference.
- Open the watch buckle and airbag buckle.
- Select the size of the strap based on the measurement, and then fasten the nail buckle.
- Fasten the airbag buckle to finish adjusting the strap.
Thanks for your feedback.