HUAWEI FreeLace Pro 2
  • HUAWEI FreeLace Pro 2
Green, Black
  • Total length (including the earbuds and M-sized ear tips):

    Approx. 875 mm

    *The actual size of the product may vary with the product configuration and manufacturing process.

  • Earbuds:

    Approx. 34.5 g

    *The actual weight of the product may vary with the product configuration and manufacturing process.

  • Toggle switch:

    Power on: Flip the toggle switch to expose the green dot. The earbuds will automatically enter Pairing mode when powered on for the first time.

    Power off: Flip the toggle switch to expose the red dot.

    Function button:

    Click once: Pause/Play audio, or answer/end a call

    Click twice: Next track

    Click three times: Previous track

    Hold down for 2 seconds: Enable Bluetooth Pairing mode, or reject a call

    Hold down for 10 seconds: Restore to factory settings

    Volume+ and Volume- buttons:

    Click Volume+ button once: Increase the volume

    Click Volume- button once: Decrease the volume

    Hold down for 2 seconds: Wake up the voice assistant

    Touch control:

    Hold down on the touch control area on the left earbud to switch between noise control modes (Noise cancellation, Awareness, and Off).

    *You can set the gestures for the noise control modes of the left earbud using the HUAWEI AI Life app. The actual functions are subject to the on-screen display.

  • Bluetooth

    BT 5.3

    Simultaneous Bluetooth connection with dual devices

    Supported

    Wear detection

    Not supported

    Pairing pop-up

    Supported

    *This feature requires HUAWEI phones running EMUI10 or later.

  • Battery Capacity

    Type: lithium-ion polymer battery

    Earbud: 150 mAh (minimum value)

    Charging Method

    Wired charging: USB-C

    Charging Time

    About 60 minutes

    *Data comes from Huawei lab tests and is for reference only. During testing, the ambient temperature was 25°C.

    Battery Life

    Prioritise sound quality:

    Music playback (with noise cancelling disabled): 15 hours after a full charge 

    Music playback (with noise cancelling enabled): 10 hours after a full charge 

    Prioritise connection quality:

    Music playback (with noise cancelling disabled): 25 hours after a full charge 

    Music playback (with noise cancelling enabled): 12.5 hours after a full charge 

    Voice calling (with noise cancelling disabled): 10.5 hours after a full charge 

    Voice calling (with noise cancelling enabled): 9.0 hours after a full charge

    *Music playback data comes from Huawei lab tests. During the tests, audio in AAC, L2HC, or LDAC format was played at volume level 8 after a full charge. The default settings were used for other features. Actual results may vary depending on the volume, audio source, environmental interference, product features, and usage habits.

    Voice calling data comes from Huawei lab tests. A call was made at volume level 8 in a low-noise environment after a full charge. The default settings were used for other features. Actual results may vary depending on the volume, environmental interference, noise, product features, auxiliary devices, system, and usage habits.

    Standby Time

    The earbuds will automatically shut down 72 hours after being attached magnetically, and sustain approx. 15 months in the Off state after a full charge.

    To wake up the earbuds, flip the toggle switch to expose the red dot and then back to expose the green dot, or insert the USB-C plug into your phone or tablet to being charging them.

    *Standby time data comes from Huawei lab tests.

  • Hall effect sensor/Capacitance sensor

  • Earbuds:

    IP55

    *IP55 dust- and water-resistance is only applicable to the earbuds themselves, but not to the USB-C port. This device is splash, dust, and water resistant in normal conditions, but cannot be soaked in water. It was tested under controlled laboratory conditions and got an approved rating of IP55 under IEC standard 60529. Splash, dust, and water resistance are not permanent, and the performance may deteriorate due to daily wear-and-tear. Avoid charging the device in damp environments. Liquid damage is not covered under warranty.

  • Intelligent ANC 2.0/Dual HD codecs/Active noise cancellation/AI call noise cancellation

  • SBC, AAC, L2HC, and LDAC are supported.

    LHDC and Apt-x are not supported.

    *L2HC Requires HUAWEI phones running EMUI 13.0 or later.

  • 4 × digital microphones (2 for each earbud)

    1 × MEMS microphone (in the control panel)

  • Earbuds × 1 

    Ear tips × 3 (available in S, M, and L sizes, and the M-sized ear tips are pre-installed on the earbuds)

    Quick Start Guide (including safety information) × 1

    Warranty Card × 1