Setting up my HUAWEI FreeBuds series/FreeClip earphones

Applicable products： HUAWEI FreeBuds 5i，HUAWEI FreeBuds SE 3，HUAWEI FreeBuds 6i，HUAWEI FreeBuds Pro 3，HUAWEI FreeBuds 3i，HUAWEI FreeBuds 4i，HUAWEI FreeBuds Pro 2，HUAWEI FreeBuds SE 2，HUAWEI FreeBuds SE，HUAWEI FreeBuds 4E，HUAWEI FreeBuds 5，HUAWEI FreeBuds 3 Wired Charging Case，HUAWEI FreeBuds Pro 4，HUAWEI FreeBuds 3，HUAWEI FreeBuds 4，HUAWEI FreeBuds Pro，HUAWEI FreeClip，HUAWEI FreeBuds Lipstick
Applicable products：
zoom in pic
Setting up my HUAWEI FreeBuds series/FreeClip earphones

Your HUAWEI FreeBuds series earphones can be used to listen to music, make calls, and so much more.

The FreeBuds series earphones and charging case don't need to be powered on or off. To preserve power, simply place the earphones in the charging case, and close the lid. It is recommended that you charge the charging case on a regular basis.

Connecting to your FreeBuds series wireless earphones

  1. Open the charging case and leave the earphones inside. Press and hold the Function button for at least 2 seconds (please refer to Function buttons and ports of the earphones) until the indicator flashes. The earphones will then enter Pairing mode.

    If you are using FreeBuds SE 2, open the charging case and leave the earphones inside. Touch and hold the touch control area on both earphones for at least 3 seconds. When the indicator on the charging case flashes white, your earphones are ready to be paired. If you are using the earphones to make a call, play audio, watch a video, or use any other service on another device, first pause the service or disconnect from Bluetooth. Watch the video below to learn how to pair FreeBuds SE 2 earphones.

  2. On your phone/tablet, go to Settings > Bluetooth and touch the name of the earphones in the device list to pair and connect the earphones.

Using the earphones to listen to and control audio or make phone calls

If your earphones support Smart wear detection, click here to learn how to set the feature in which the earphones pause playback when you take them off, and resume playback when you put them back on.

 
  • For details about the default shortcuts for the earphones, refer to Table 1, Table 2, and Table 3. You can set more control shortcuts such as next track, previous track, and wake voice assistant for the left and right earphones, as follows:
  • In the AI Life app, touch the earphones card, touch Gestures, and configure the gestures as needed.
Table 1. Switching between noise cancellation modes

Feature

Shortcut

Switch between noise cancellation modes

FreeBuds Pro 3/FreeBuds Pro 2/FreeBuds Pro: Pinch the touch control area on the stem.

FreeBuds 5/FreeBuds 5i/FreeBuds Lipstick/FreeBuds 4: Press and hold the stem.

FreeBuds 4i/FreeBuds 3i: Press and hold the top of the stem.

FreeBuds 3: Gently tap twice on the left earphone.
Table 2. Audio controls

Feature

Default Shortcut

Play/Pause audio
  • FreeClip: Tap twice on an earphone.
    Figure 1. FreeClip touch control area (in blue)
  • FreeBuds SE 2/FreeBuds 5/FreeBuds 5i/FreeBuds 4/FreeBuds Lipstick/FreeBuds 4i/FreeBuds SE/FreeBuds 3i: Double-tap on the left or right earphone.
  • FreeBuds 3/FreeBuds 2/FreeBuds 2 Pro/FreeBuds/FlyPods/FlyPods Pro/FreeBuds Lite/FlyPods Lite: Double-tap on the right earphone to play music.
  • FreeBuds Pro 3/FreeBuds Pro 2/FreeBuds Pro: Pinch once on an earphone to play/pause audio.

Play previous/next track
  • FreeClip: Tap three times on an earphone to switch to the next track.
    Figure 2. FreeClip touch control area (in blue)
  • FreeBuds Pro 3/FreeBuds Pro 2/FreeBuds Pro: Pinch twice on an earphone to skip to the next track and pinch three times to return to the previous track.
  • FreeBuds 3: Double-tap on the right earphone to skip to the next track.
  • Other earphones: Set shortcuts for more controls (such as playing the next/previous track or waking up the voice assistant).

Adjust the volume

FreeBuds Pro 3/FreeBuds 5/FreeBuds Pro 2/FreeBuds 5i/FreeBuds 4/FreeBuds Lipstick/FreeBuds Pro: Swipe up or down to raise or lower the volume.
Table 3. Using the earphones to make calls and receive messages

Feature

Shortcut

Answer/End a call
  • FreeClip: Tap twice on an earphone to answer or end a call.
  • FreeBuds SE 2/FreeBuds 5/FreeBuds 5i/FreeBuds Lipstick/FreeBuds 4/FreeBuds 4i/FreeBuds 3i/FreeBuds 2 Pro/FreeBuds 2/FreeBuds Lite/FreeBuds/FlyPods 3/FlyPods Pro/FreeBuds SE/FlyPods Lite: Double-tap on the left or right earphone to answer or end a call.
  • FreeBuds 3: Double-tap on either earphone to answer the call; double-tap on the right earphone to end the call.
  • FreeBuds Pro 3/FreeBuds Pro 2/FreeBuds Pro: Pinch once on the left or right earphone to answer or end a call.

Reject a call

FreeBuds SE 2/FreeBuds 5/FreeBuds 5i/FreeBuds Lipstick/FreeBuds 4: Press and hold the left or right earphone.

The press and hold gesture is set to None by default on FreeBuds SE 2. You can set the press and hold gesture to reject incoming calls in the AI Life app.

FreeBuds Pro 3/FreeBuds Pro 2/FreeBuds Pro: Pinch twice on either earphone.

Charging your FreeBuds series earphones

The charging case can be charged with a charger, mobile power bank, or computer through a USB Type-C cable.

Place the earphones in the charging case and close the lid to start charging the earphones.

You can learn more about charging here.

Helpful or not?
Yes No
Thanks for your feedback.