Voice prompts on HUAWEI earphones

Applicable products: HUAWEI FreeBuds 5i,HUAWEI FreeBuds 6i,HUAWEI FreeBuds Pro 3,HUAWEI FreeBuds 4i,HUAWEI FreeBuds Pro 2,HUAWEI FreeBuds SE 2,HUAWEI FreeBuds 4E,HUAWEI FreeBuds 5,HUAWEI FreeLace Pro 2,HUAWEI FreeBuds 3 Wired Charging Case,HUAWEI FreeBuds 3,HUAWEI FreeBuds 4,HUAWEI FreeBuds Pro,HUAWEI FreeLace Pro,HUAWEI FreeLace Lite,HUAWEI FreeClip,HUAWEI FreeLace,HUAWEI FreeBuds Lipstick
Applicable products:
zoom in pic
Voice prompts on HUAWEI earphones

When the earphones are used with phones running iOS/EMUI 10.0/HarmonyOS 2.0 or later, the language of the voice prompts will vary depending on the phone system language. If the language on your phone is set to Chinese, the voice prompts will be in Chinese. Otherwise, voice prompts will be in English. Currently, it is not possible to disable or modify voice prompts, or adjust their volume.

The language of voice prompts on FreeLace Pro and FreeLace Lite earphones is the language of the country/region of manufacture by default. You cannot change the language or adjust the volume level.

Table 1. FreeClip/WATCH Buds earphones

Scenario

Prompt

  • Earphones are being worn

Dedicated tones

  • The left and right earphones worn on the right and left ears respectively

Left and right buds switched automatically

After Auto-switch L/R is enabled, the earphones won't play the prompt tone when you only wear an earphone.

  • Double-tap
  • Triple-tap
  • Bluetooth has been disconnected
  • Battery is less than 20% or 10%

Dedicated tones

  • ANC on

Noise cancellation

  • ANC off

Off

  • Awareness mode enabled

Awareness

Table 2. FreeBuds 6i/FreeBuds Lipstick 2/FreeBuds Pro 3/FreeBuds 5/FreeBuds Pro 2/FreeBuds 5i/FreeBuds Lipstick/FreeBuds Pro/FreeBuds 4/FreeBuds 4i/FreeBuds 3/FreeBuds SE/FreeBuds SE 2 earphones

Scenario

Prompt

  • Earphones are being worn
  • Bluetooth has been disconnected
  • Swiping an earphone
  • Swiping up to the maximum volume
  • Swiping down to the minimum volume
  • Battery level is less than 10% (FreeBuds Pro 3/FreeBuds Pro 2 +/FreeBuds Pro 2)
  • Battery level is less than 10% or 5% (FreeBuds 5i/FreeBuds Lipstick/FreeBuds Pro/FreeBuds 4/FreeBuds 4i/FreeBuds 3/FreeBuds SE)
  • Battery level is less than 20% and 10% (FreeBuds 6i/FreeBuds Lipstick 2/FreeBuds 5/FreeBuds 4)
  • Battery level is less than 10% or 7% (FreeBuds SE 2)

Dedicated tones

 
  • When putting on the left and right FreeBuds Pro/FreeBuds 4i/FreeBuds 3/FreeBuds SE earphones at a time, the prompt tone will play from both earphones. You may fail to hear that tone when putting on the second earphone.
  • FreeBuds SE 2 won't play a tone when you put on or swipe on the earphones.
  • Bluetooth connected

Dedicated tones

Only supported on FreeBuds 6i/FreeBuds 4i/FreeBuds SE 2/FreeBuds SE

  • Pressing and holding an earphone
  • Pinching an earphone

Dedicated tones

Only supported on FreeBuds Pro 3/FreeBuds Pro

  • ANC on
  • FreeBuds Lipstick 2/FreeBuds 5/FreeBuds Lipstick/FreeBuds 4/FreeBuds 3: Noise cancelling
  • FreeBuds Pro 3/FreeBuds Pro 2/FreeBuds 6i/FreeBuds 5i/FreeBuds Pro/FreeBuds 4i: Noise cancelling
  • ANC off
  • FreeBuds Lipstick 2/FreeBuds 5/FreeBuds Lipstick/FreeBuds 4/FreeBuds 3: Off
  • FreeBuds Pro 3/FreeBuds Pro 2/FreeBuds 6i/FreeBuds 5i/FreeBuds Pro/FreeBuds 4i: Off
  • Awareness mode enabled

Awareness

Table 3. FreeClip/FreeBuds Pro 3 charging case

Scenario

Prompt

  • Being charged (connected to a USB cable or placed on a wireless charger)

Dedicated tones

  • Entering Pairing mode

Dedicated tones

  • Pairing completed

Dedicated tones

  • Restored to factory settings (played when the indicator flashes red after the device is restored to its factory settings and restarted)

Dedicated tones

  • Low battery level of the charging case (played when you take the earphones out of the case or put them into the case and then close the case, with the battery level of the charging case being lower than 20%)

Dedicated tones

Voice prompts for charging cases are available after you have updated the earphones' firmware and Audio Accessory Manager to their latest versions. This feature is enabled by default. To disable it, access the earphones' card in the AI Life app, and go to Settings > Charging case tone.

Table 4. FreeLace Pro 2/FreeLace Lite/FreeLace Pro earphones

Scenario

Prompt

  • Power-on/off
  • Entering Pairing mode
  • Successful pairing
  • Bluetooth disconnection
  • Volume adjustment
  • Restoring to factory settings
  • Low battery level (battery level ≤ 10% or 5%)

Dedicated tones

If a non-HUAWEI phone is playing audio before being connected to a pair of HUAWEI FreeLace Pro 2 earphones, the pairing prompt may not fully play. This is normal and does not indicate an issue with your device.

  • ANC on

FreeLace Pro 2/FreeLace Pro: Noise canceling

  • ANC off

FreeLace Pro 2/FreeLace Pro: Off

  • Awareness mode enabled

FreeLace Pro 2/FreeLace Pro: Awareness

Volume adjustment is not supported for FreeLace Lite/FreeLace Pro.

Table 5. FreeLace earphones

Scenario

Prompt

Power on

A power-on prompt is played after a knock prompt.

Power off

A power-off prompt is played after a double-knock prompt.

Entering Pairing mode

Waiting to connect

Successful pairing

Successful connection

Volume adjustment

A beep prompt is played when you turn up or down the volume.

Restoring to factory settings

No prompt

End a call

A beep prompt

Table 6. FreeBuds Studio earphones

Scenario

Prompt

Power on

Power-on tone

Power off

Power-off tone

Entering Pairing mode

Waiting to connect

Successful pairing

Successful connection

Bluetooth automatically disconnects

Disconnection tone

Restoring to factory settings

Power-on tone

Switching between noise cancellation modes

Noise cancellation

Awareness

Off

Volume up/down

Dedicated tones

  • Waking up the voice assistant
  • Receiving a new message

Tones set on your phone/tablet

Adding to favorites in HUAWEI Music

Favorited

Fail to add to favorites in HUAWEI Music

Unable to add to favorites

Low battery level (battery level ≤ 10% or 5%)

Battery low

Table 7. FreeBuds 2/HONOR FlyPods/HONOR FlyPods Pro/FreeBuds 2 Pro earphones

Scenario

Prompt

  • Switching between the primary and secondary earphones
  • Bluetooth connection
  • Low battery level (battery level ≤ 10% or 5%)

Dedicated tones

Helpful or not?
Thanks for your feedback.

share

Share