HUAWEI WiFi Q2 (3 Pack)

HUAWEI WiFi Q2 (1 Base + 2 Satellites)

• Base router

  

  No.	Button/ Port	Description
  1	H button This article uses the H button to represent the button.	The indicator will flash slowly when the router discovers a device that supports HarmonyOS Connect. You can press the H button to connect the device to the router's Wi-Fi. Devices that support HarmonyOS Connect include: HUAWEI routers, HUAWEI mobile phones (EMUI 5.1 or later), etc.
  2	Power port	Connect to power supply. Avoid using power strips. Some power strips have EMI filters that may cause a Secondary router to be unable to connect to the network.
  3	WAN port	Connect to an Internet source (such as a broadband or optical modem).
  4	LAN ports	Connect to a device (such as a computer or TV set-top box).
  5	RESET hole	Power on the router and wait for a moment (until the router completes the startup process). Use a needle or pin to press the RESET hole on the router for approximately two seconds and release it until the indicator light goes out. Once the router reboots, its factory settings are restored.

• Satellite router

  

  No.	Button/ Port	Description
  1	RESET hole	Power on the router and wait for a moment (until the router completes the startup process). Use a needle or pin to press the RESET hole on the router for approximately two seconds and release it until the indicator light goes out. Once the router reboots, its factory settings are restored.
  2	LAN port	Connect to network devices like computer.
  3	Power plug	Connect to a wall power socket. Avoid using power strips. Some power strips have EMI filters that may cause a Satellite router to be unable to connect to the network.