Measure Height

 

• For best results, keep a distance of 1.5–2 m (about 5–6.6 ft.) between your device and the subject.

• To measure the height of two or three people at the same time, get them to stand side by side, then mark the feet of one subject as the starting point. Lift your device until your subjects' faces have been identified, at which point their individual heights will be displayed.

1. Open the Tools folder on the home screen, then touch AR Measure.

2. On the AR Measure screen, touch Height.

3. Frame the subject's feet in the viewfinder and slowly move your device to locate the plane.

4. Point at the subject's feet and touch to mark the starting point.

5. Slowly lift your device to include the subject's entire body in the viewfinder. When the subject's face is identified, your device will automatically display the subject's height.

   Drag the end point to fine-tune the measurement result.

Touch to capture the measuring screen.

Measure Length

For best results, keep a distance of 0.3–1.5 m (about 1–5 ft.) between your device and the object.

1. On the AR Measure screen, touch Length.

2. Frame the object in the viewfinder and slowly move your device to locate the plane.

3. Point at the object and touch to mark the starting point.

4. Move your device slowly so that travels along the edge of the object. When it reaches the end of the edge, touch .

5. Your device will automatically display the result.

   Drag the end point to fine-tune the measurement result.

Measure Area

Currently, only the area of rectangles can be measured.

1. On the AR Measure screen, touch Area.

2. Frame the object in the viewfinder and slowly move your device to locate the plane.

3. When your device identifies the object, a frame will appear. After the frame overlaps with the object, touch .

4. Your device will automatically display the result.

   Drag the end point to fine-tune the measurement result.

Measure Volume

 

• Currently, only the volume of cubes can be measured.

• Make sure the object is not placed against a wall. Ensure there is a distance of 1–1.5 m (3.3–5 ft.) between your device and the object.

1. On the AR Measure screen, touch Volume. Frame the object in the viewfinder and slowly move your device to locate the plane.

2. Point at the tip of the object's bottom edge and touch to mark the starting point.

3. Move your device slowly so that travels along the long edge of the object. When it reaches the end of the edge, touch .

4. Move your device to create a frame for the object's bottom. When the frame overlaps with the bottom plane, touch .

5. Move your device to create a frame for the whole object. After the frame overlaps with the object, touch .

6. Your device will automatically display the result.

   Drag the tips to fine-tune the measurement result.