| What Functions of Lebooo Smart Sonic Toothbrush Can Be Controlled via Huawei HUAWEI AI Life App? |
- To Connect to the App:
- Open the Huawei HUAWEI AI Life App and confirm that the network connection is normal and the Bluetooth and GPS of the mobile phone/tablet are turned on. If this is the first time you use it, please register/log in to your Huawei account according to the app guidelines.
- Go to the homepage of the App, click "+" and select "Add Device". Before you connect the toothbrush, please make sure that it is fully charged and not activated. When you bind the toothbrush, you need to place the toothbrush close to the phone/tablet(Within one meter).
- In the list of scanned devices, click "Connect" on the right side of "Lebooo Smart Sonic Toothbrush ". If the toothbrush is not found, click "Manual Add" and add the toothbrush manually according to the interface prompts.
- The interface prompts that the device is connecting. At this time, the blue indicator of the body is on. According to the prompt, press and hold the button of the body for 2 seconds. Then the device is successfully connected.
- Set the name and placement of the toothbrush. After this operation is completed, return to the homepage of the app and click the toothbrush icon to enter the control interface. Then you can exercise controls on the toothbrush.
- Control Function
Set the tooth brushing mode
1. There are five available tooth brushing modes: cleaning mode, brightening and whitening mode, sensitive mode, nursing mode, and personalized mode.
2. There are 20 options in the personalized mode. You can choose one of them for tooth brushing each time.
Set the tooth brushing time
There are three options for setting the tooth brushing time: 2 minutes, 2.5 minutes, and 3 minutes. The default value is 2 minutes.
Set the starting position of tooth brushing
There are 4 options for the starting position of tooth brushing: lower left area, lower right area, upper right area, and upper left area. The default is the lower left area (as shown in figure below).
Splash proof function of the brush head
1. The splash proof function is turned off by default. When this function is turned on, the motor will vibrate weakly to prevent water stains and toothpaste from splashing upon toothbrush startup. At this time, the vibration is not included in the total tooth brushing time. When the brush head touches the teeth, the vibration increases to the normal volume, and the brushing timing starts.
2. When the toothbrush leaves the tooth surface during tooth brushing, the motor recovers weak vibration.
Overpressure reminder
1. The overpressure reminder function is turned on by default. The body has a built-in precision pressure sensor. If you use too much force when brushing your teeth, the HUAWEI AI Life App page will display a prompt saying "Too much pressure", and the body is accompanied by/has intermittent and weak motor vibration (as shown in figure below).
2. When the pressure returns to normal, the prompt disappears.
- Procedure
- Open the Huawei HUAWEI AI Life App and confirm that the network connection is normal and the Bluetooth and GPS of the mobile phone/tablet are turned on. If this is the first time you use it, please register/log in to your Huawei account according to the app guidelines.
- Go to the homepage of the app, click "+" and select "Add Device". Before you connect the toothbrush, please make sure that it is fully charged and not activated. When you bind the toothbrush, you need to place the toothbrush close to the phone/tablet.
- In the list of scanned devices, click "Connect" on the right side of "Lebooo Smart Sonic Toothbrush". If the toothbrush is not found, click "Manual Add" and add the toothbrush manually according to the interface prompts.
- The interface prompts that the device is connecting. At this time, the blue indicator of the body is on. According to the prompt, press and hold the button of the body for 2 seconds. Then the device is successfully connected.
- Set the name and placement of the toothbrush. After this operation is completed, return to the homepage of the app and click the toothbrush icon to enter the control interface. Then you can exercise controls on the toothbrush.