Changing and adjusting the strap for the HUAWEI WATCH/WATCH 3/WATCH GT 3 Series devices
Applicable products： HUAWEI WATCH GT 3 SE，HUAWEI WATCH GT 3(42mm elgant leather strap、46mm classic、46mm active、huawei watch gt3 42mm elgant milanese strap、46mm elite、42mm active)，HUAWEI WATCH 2 Classic，HUAWEI WATCH GT Runner(black、grey)，HUAWEI WATCH GT 3 Pro，HUAWEI WATCH 2，HONOR Watch ES，HUAWEI WATCH 3 Pro，HUAWEI WATCH 3
Applicable system: Unrelated to OS version
Applicable products：
Applicable system:
These are your search results, please select one
No results found, please select again
zoom in pic
Changing and adjusting the strap for the HUAWEI WATCH/WATCH 3/WATCH GT 3 Series devices

Adjusting the strap

Three-bead metal strap:

  1. To remove the strap, push the lever in the direction indicated by arrow 1 and then remove the link in the direction indicated by arrow 2.

  2. To install a strap, push the lever in the direction indicated by arrow 1 and then install the link in the direction indicated by arrow 2.

    Ceramic strap:
    1. To remove the strap: Use a screwdriver to rotate and remove the screw in the counter-clockwise direction, eject the bolt on the other side, and remove the link.

    2. To install a strap, insert the bolt into one side of the hole, and the screw into the other side, and use a screwdriver to rotate the screw in the clockwise direction to install the link.

Changing the strap

  • If you are using a non-metal strap, perform the following steps to remove it and install a new strap in the reverse order.
  • To remove and install a metal strap, perform the following steps:
    • Removal:
      • Watch case with one guide slot on a lug:

      • Watch case with two guide slots on a lug:

    • Installation:
      • If the watch case has one guide slot on a lug, insert the left spring bar of the watch strap into the bar hole on the watch case and then press the right spring bar through the guide slot.
      • If the watch case has two guide slots on a lug, press the left and right spring bars of the watch strap through the two guide slots.
    • Fastening the watch buckle

      Press the middle position of the buckle against a lug.

 
  • The leather and metal straps are not waterproof. Please keep it dry, and remove any sweat and other liquids in a timely manner.
  • Once you have done a lot of workouts, please clean the strap in a timely manner to avoid the accumulation of sweat, which may cause bacteria to build up. You can clean the braided strap with washing powder or washing-up liquid once every one to two weeks. The method for cleaning the strap is the same as that for washing clothes. After cleaning the strap, dry it in a well-ventilated and dry place. Do not wear it when wet.
Helpful or not?
Yes No
Thanks for your feedback.