Unpacking the printer
Applicable products：
HUAWEI PixLab B5，HUAWEI PixLab X1
Applicable system:
Unrelated to OS version
Applicable products：
Applicable system:
These are your search results, please select one
No results found, please select again
| Unpacking the printer |
- Remove the printer's packaging and all adhesive tape.
Do not forget to remove the adhesive tape on the back of the printer.
- Place the printer on a horizontal surface, with a space of at least 10 cm behind the printer so that the dust-proof cover can be ejected when you load paper into the paper tray.
- Press both sides of the paper tray with both hands, pull it out, and remove the adhesive tape from the paper tray. Hold the handle and pull out the rear baffle. Flatly load the paper (such as A4 paper). When loading other sizes of paper, adjust the rear and left-right baffles to secure them, and reinsert the paper tray.
- Connect the printer to a power supply and toggle on the Power switch. The printer will enter the working state when the Start indicator lights up.
- Press and hold the Start button for 3 seconds to check whether the system information page can be printed. If so, it indicates that the printer has been assembled properly.
The system information page contains configuration of the printer, such as the model name, network parameters, and hotspot name and password, for you to view basic information about the printer. Keep the system information page properly to prevent the disclosure of any information.
Thanks for your feedback.