Project Your Device Screen Wirelessly
Applicable products： HUAWEI MatePad(10.4 inches wifi 3gb+32gb、10.4 inches lte 6gb+128gb、10.4 inches wifi 6gb+128gb、10.4 inches lte 4gb+64gb、10.4 inches wifi-only 4gb+64gb、10.4 inches lte 3gb+32gb、10.4 inches wifi 4gb+64gb、10.4 inches wifi-only 4gb+128gb)
Applicable system: HarmonyOS 2.0
Applicable products：
Applicable system:
These are your search results, please select one
No results found, please select again
zoom in pic
Project Your Device Screen Wirelessly

Project your device wirelessly to stream films and work on a bigger screen (such as a TV).

Different display devices support different projection protocols. Therefore, the projection method may vary. Choose a suitable method based on the protocol supported by your device.

For details about the supported projection protocols, refer to the product manual or contact the product manufacturer.

  1. Ensure that the DVKit/Cast+/Miracast switch or the projection switch is enabled on the display device. For details about how to turn on the switch, refer to the product manual or contact the product manufacturer.

  2. Swipe down from the upper right edge of your device to display Control Panel and touch .

  3. In Control Panel, touch to expand the shortcut switches panel (depending on your device model), then touch Wireless Projection. Your device will then start searching for available external displays.

    You can also go to Settings > More connections and touch Wireless Projection.

  4. Touch the device that you want to project your device to from the detected devices.

To exit wireless projection, swipe down from the upper left edge of the screen to display Notification panel and touch Disconnect.

Helpful or not?
Yes No
Thanks for your feedback.