| Project Your Device Screen Wirelessly |
Project your device wirelessly to stream films and work on a large-screen device (such as a Vision).
The projection method may vary depending on the display device. The following uses projecting to a HUAWEI Vision as an example.
The figures are for reference only.
On the Vision home screen, go to , and make sure that Projection is enabled.
Swipe down from the upper right corner of the device screen to display Control Panel, touch
to expand the shortcut switches panel (depending on your device model), enable Wireless Projection, and follow the onscreen instructions. Your device will then start searching for available Vision products.
You can also go to or , and enable Wireless Projection (depending on your device model).
Touch the device that you wish to project your device to from the detected Vision products.
capsule at the top of the device screen. In the live window, perform the following steps:
-
By default, banner notifications for incoming calls, messages, and alarms, and Multi-Window will only display on your phone instead of the large-screen device. To change the settings, touch the blank area in the live window and disable Hide notifications in the displayed dialog box.
The Hide notifications feature is only supported on certain products.
Touch any blank area in the live window. In the displayed dialog box, you can select whether the audio and video will play from the device or the large screen.
Touch the
capsule at the top of the device screen, and touch 
in the live window.Swipe down from the upper left corner of your device to display the notification panel, and touch
.