Speaker buttons

Powering on/off

Press and hold the power button for more than 2 seconds to power on or off the speaker.

Bluetooth pairing

When the speaker is powered on, press and hold the Bluetooth button for more than 2 seconds until the indicator flashes white to enter Pairing mode. When powering on the speaker for the first time, Bluetooth pairing mode is automatically enabled.

Volume adjustment

Rotate the knob clockwise to turn up the volume, and rotate the knob anticlockwise to turn down the volume. When the volume is adjusted to the maximum or minimum level, a prompt tone is played.

If your phone is running EMUI 10.1 or later or HarmonyOS 2.0 or later, you can adjust the absolute Bluetooth volume to synchronize the change in volume between your phone and the speaker. When you adjust the volume on your phone, the volume of the speaker will change in the same way. When you adjust the volume on the speaker, the Bluetooth volume on your phone will also change in the same way.

Support and settings for Bluetooth absolute volume vary between phone brands.

Voice calls

Press the knob to answer a call or press and hold the knob to reject a call. During a call, press and hold the knob to end the call.

Microphone

During a call, press the knob to mute or unmute the microphone. When the microphone is muted, the other party will not be able to hear you, and the mute indicator at the top of the knob will turn red.

Music playback

Press the knob to pause or resume music playback.

Double-press the knob to play the next song, and triple-press the knob to play the previous song.

Factory reset

When the speaker is powered on, press and hold the power button for 8–12 seconds to restore the speaker to its factory settings.

Force shutdown and restart

When the speaker is powered on, press and hold the Function button for more than 12 seconds to force power off and restart the speaker.

Automatic power-off

To reduce power consumption, the speaker will automatically power off after 30 minutes of no music being played or a call being made. Restart the speaker if you want to use it again.