Connecting the monitor to a device such as a computer

Applicable products： HUAWEI MateView GT(34'')
Applicable products：
zoom in pic
Connecting the monitor to a device such as a computer
 
  • The device does not come with certain components and cables and you need to purchase them separately.
  • Standard cables vary depending on the monitor model.

Open the protective cover on the bottom part of the monitor rear to view the ports. You can connect the monitor to a device such as a computer based on the cable type.

 
  • You will see a monitor nameplate attached under the ports and information such as S/N on the nameplate.
  • After the cables are connected, we recommended that you arrange the cables and reinstall the protective cover to prevent dust from entering the ports.
  • You can adjust the tilting angle and height of the monitor as required.

DP or HDMI cable connection

  1. Connect one end of a DP or HDMI cable to the DP or HDMI port on the monitor, and connect the other end to the DP or HDMI port on a computer.

    If you want to use the microphone of the ZQE-CAA monitor, you also need a USB-C to USB-A cable to connect the monitor to the computer.

  2. Connect other cables such as power cables for the monitor and computer and then power on the monitor and computer. If the monitor screen is turned on, it indicates that the connection is successful.

USB-C to USB-C cable connection

 
  • This connection only applies to ZQE-CAA monitors.
  • It is recommended that you use the USB-C to USB-C cable delivered with the monitor. If a non-standard cable is used, some features may be unavailable.
  • The USB-C port of an external device must be a port that supports display, data transmission, and charging.
  • This connection supports charging connected devices, such as laptops or phones.

Connecting to a computer

  1. Connect one end of a USB-C to USB-C cable to the USB-C port on the monitor and the other end to the USB-C port on a computer.

    In this connection, you can use the microphone of the monitor.

  2. Connect other cables such as power cables for the monitor and computer and then power on the monitor and computer. If the monitor screen is turned on, it indicates that the connection is successful.

Connecting to a phone/tablet

  1. Connect one end of a USB-C to USB-C cable to the USB-C port on the monitor and the other end to the USB-C port on a phone/tablet.
  2. Connect the monitor to a power supply and press the 5-way directional button upward to power on the monitor. The screen of the phone/tablet will then be projected on the monitor. When you perform operations on the phone/tablet, its screen will be synchronously displayed on the monitor, allowing for a large-screen browsing experience.
Helpful or not?
Yes No
Thanks for your feedback.

share

copy

Share