Audio sharing feature on HUAWEI earphones and HUAWEI Eyewear

Applicable products: HUAWEI FreeBuds 5i,HUAWEI FreeBuds 6i,HUAWEI FreeBuds Pro 3,HUAWEI FreeBuds Pro 2,HUAWEI FreeBuds 4E,HUAWEI FreeBuds 5,HUAWEI FreeLace Pro 2,HUAWEI FreeBuds Pro 4,HUAWEI FreeLace Pro,HUAWEI FreeClip,Tablet,HUAWEI X GENTLE MONSTER Eyewear II,Smartphone,HUAWEI WATCH Buds,HUAWEI FreeBuds 4((wireless charging case))
Applicable products:
zoom in pic
Audio sharing feature on HUAWEI earphones and HUAWEI Eyewear

Connect two pairs of HUAWEI earphones/HUAWEI Eyewear to certain HUAWEI phone/tablet models running EMUI 13.0 or later, to listen along with friends and family.

Supported models

Table 1. The following table lists the HUAWEI phone/tablet models that support this feature. For updates to this list, please stay tuned for official announcements.

Pura series

  • Pura 70、Pura 70 Pro、Pura 70 Ultra

Mate series

  • Mate X5
  • Mate X3
  • Mate 60 series
  • Mate 50 series
  • Mate 40 series
  • Mate 30 series
  • Mate X2
  • Mate Xs 2
  • Mate Xs

P series

  • P60 series
  • P50 series
  • P40 series

nova series

  • nova 12 series
  • nova 9/nova 9 Pro
  • nova 8 series
  • nova 7 series

HONOR

  • HONOR 30/30 Pro/30 Pro+

Tablets (HarmonyOS 3.0.0.170 or later required)

  • MatePad Pro 11-inch 2024 Wi-Fi Edition
  • MatePad Pro 13.2-inch 2023 Wi-Fi Edition
  • MatePad Pro 12.6-inch 2021
  • MatePad Pro 12.6-inch 2022
  • MatePad Pro 11-inch 2022
  • MatePad 11-inch 2023
  • MatePad 11-inch 2021
  • MatePad Air 11.5-inch
Table 2. The following table lists the HUAWEI earphones models that support this feature (not all HUAWEI earphones support audio sharing)

Self-sharing (the earphones are connected to the audio sharing device)

Supported on FreeLace Pro 2/FreeClip/FreeBuds Pro 3/FreeBuds 5/WATCH Buds/FreeBuds Pro 2/FreeBuds 6i/FreeBuds 5i/FreeBuds 3/FreeBuds 4/FreeBuds 4E/FreeBuds Lipstick/FreeBuds Pro/FreeBuds Studio/FreeLace/FreeLace Lite/FreeLace Pro/HUAWEI X Gentle Monster Eyewear II/HUAWEI Eyewear 2/HUAWEI Eyewear. FreeBuds 4i does not support audio sharing.

Temporary sharing (the earphones are not connected to the audio sharing device)

Supported on FreeBuds 6i/FreeLace Pro 2/FreeClip/FreeBuds Pro 3/FreeBuds 5/FreeBuds Pro 2.

Instructions

  • If your audio sharing phone/tablet has been connected to two pairs of earphones, follow the steps below for self-sharing:
    • Method 1: Swipe down from the right corner of the phone/tablet screen to display Control Panel, and go to > Audio projection. Select the two connected pairs of earphones to have the audio play from both pairs of earphones.
    • Method 2: Swipe down from the right corner of the phone/tablet screen to display Control Panel, and go to Super Device > . Drag the icons of the two pairs of earphones to the device icon, to have audio play from both pairs of earphones.

       
      • Audio controls during audio sharing: During audio playback, you can pause or resume playback, or skip to the previous or next track, from either pair of earphones. To adjust the volume, slide on the earphone, or go to Control Panel > > Audio projection on your phone and drag the slider to adjust the volume separately for each pair of earphones. Pressing the side button on the phone will adjust the volume of both pairs of earphones.
      • Call controls during audio sharing: In order to safeguard privacy, audio sharing is not supported during calls (when there is an incoming call, or when you are making calls in WeChat, QQ, or other third-party apps). WeChat ringtones and SMS message tones will be shared during audio sharing. By default, the pair of earphones first selected, or the pair whose icon is first dragged to the phone to establish a connection, will be used to make or answer calls. During self-sharing, if you answer an incoming call through a pair of earphones, sound will play from that pair of earphones.
  • If your audio sharing phone/tablet has been connected to only one pair of earphones, share audio to another pair via temporary sharing as follows:
    • Method 1: Swipe down from the right corner of the phone/tablet screen to display Control Panel, and go to > Audio projection. Select the connected earphones as the output device, and touch Share audio. The Search for devices screen will display. Bring a pair of earphones (in the case with the lid open) that supports temporary sharing close to your phone/tablet. If the earphones fail to be detected, hold down on the button on the charging case for 2 seconds until the indicator flashes, and bring the earphones close to your phone/tablet to initiate a connection.

    • Method 2: Swipe down from the right corner of the phone/tablet screen to display Control Panel, and go to > Audio projection. Select the connected earphones as the output device. Go back to the home screen, hold down on the button on the charging case of the earphones that support temporary sharing for at least 2 seconds (for FreeLace Pro 2, flip the Power switch to expose the green dot, and press and hold the Function button for at least 2 seconds) until the indicator flashes, and bring the earphones close to your phone/tablet to initiate a connection. Select SHARE in the pop-up that appears.

  • If two phones/tablets that support audio sharing are respectively connected to a pair of earphones that support temporary sharing, place the two phones/tablets close to each other, and a Listen with XX? prompt will display. Touch CONNECT on the sharing device to share the audio.

  • To halt audio sharing: Go to Control Panel > > Audio projection, and deselect the target earphones, or place the earphones in the charging case and close the case. After you exit temporary sharing, the pairing record between your device and the earphones to which audio was shared will be automatically deleted.

 
  • When audio sharing is enabled, Spatial Audio and Smart HD are automatically disabled, and Bluetooth audio codec will be set to AAC. Once audio sharing is disabled, Spatial Audio and Smart HD will be automatically restored to their original settings.
  • For privacy purposes, after Audio Accessory Manager is updated to version 13.0.0.100 or later, voice broadcast will be temporarily disabled when audio sharing is enabled on the earphones.
Helpful or not?
Thanks for your feedback.

share

Share