Disabling Wi-Fi on a HUAWEI CPE
Applicable products：
zoom in pic
Disabling Wi-Fi on a HUAWEI CPE
 
  • Wi-Fi is enabled by default on HUAWEI CPEs.

  • Connect your computer to the LAN port of the CPE using a network cable, and then log in to the management page to enable Wi-Fi. It is recommended that you keep Wi-Fi enabled.

  • After the CPE is restored to factory settings, Wi-Fi is automatically enabled. However, all configuration parameters are cleared after the restoration. In this case, you will need to set the parameters again.
  1. Connect your phone or computer to the CPE's Wi-Fi (or connect your computer to the CPE's LAN port using a cable). Enter 192.168.8.1 in the address box of the browser, and enter the login password to access the management page of the CPE.
  2. Go to Wi-Fi Settings > Wi-Fi Basic Settings, check Wi-Fi, then click OK in the displayed dialog box to disable Wi-Fi.
Helpful or not?
Yes No
Thanks for your feedback.