Modify the IP address of the WAN/LAN port

The IP address of the WAN port is automatically obtained from the upstream network and cannot be changed, except for the static IP mode, which needs to obtain the IP address from the carrier. The IP address of the LAN port can be changed as follows:

The CPE LAN IP address cannot be in the same network segment as the WAN IP address.

1. Connect your computer to the CPE's Wi-Fi (or to the CPE's LAN port using an Ethernet cable). Enter 192.168.8.1 in the address box of the browser, and enter the login password to access the management page of the CPE.
2. Go to Advanced > Router> DHCP. In the LAN IP address field, enter the new IP address, and click Save. To access the web-based management page, enter the new IP address in the address bar of a browser.

   

3. To change the network segment of the IP address pool, for example, from 192.168.8.* (* ranges from 2 to 254 by default) to 10.10.10.* (* ranges from 2 to 254 by default), you can directly change LAN IP address to 10.10.10.1. In this case, the DHCP IP range is automatically changed to 10.10.10.2–10.10.10.254.

If you only want to change the value of * in 192.168.8.*, you can directly change the start and end IP addresses in DHCP IP range.