Enable or disable the data service

By default, the data service function is enabled for the CPE. After the CPE registers for the Internet, it automatically initiates a dial-up connection. You can manually disable this function and manually enable it when you need to access the Internet.

1. Connect your computer to the CPE's Wi-Fi (or to the CPE's LAN port using an Ethernet cable). Enter 192.168.8.1 in the address box of the browser, and enter the login password to access the management page of the CPE.
2. Go to Network Settings > Mobile Network > Internet Connection. Disable the Mobile data switch to disable the data service. In this case, the CPE will disconnect from the network.

3. When you need to access the Internet, turn on the Mobile data switch to enable the data service. The CPE will re-initiate a dial-up connection.