Installation procedure and precautions for the HUAWEI Vision S AI camera
Applicable products:
Installation procedure and precautions for the HUAWEI Vision S AI camera |
- Power off the Vision by pressing the power button on the remote control and selecting to power off the Vision, or disconnect the power cable.
Ensure that the Vision is powered off or its power cable is disconnected before installing the AI camera.
- Remove the case from the camera base located at the top center of the device's rear side. Align the camera with the base and release when it is magnetically attached.
Camera indicator status:
- If the indicator blinks white, it indicates that the camera has been successfully installed and is launching.
- If the indicator is steady white, it indicates that the camera is working.
- If the indicator is off, it indicates that the camera is disabled.
- When you use the AI camera for the first time, if a message is displayed after you power on the Vision indicating that the camera is being updated, wait for 3–5 minutes for the update to finish.
- Adjust the angle of the camera before using the Camera or MeeTime app.
Do not remove the camera when the Vision is being powered on. Ensure that the Vision is powered off or its power cable is disconnected before removing the camera.
Thanks for your feedback.