1

H button

This article uses the H button to represent the button.

The indicator will flash slowly when the router discovers a device that supports HarmonyOS Connect. You can press the H button to connect the device to the router's Wi-Fi.

Devices that support HarmonyOS Connect include: HUAWEI routers, HUAWEI mobile phones (HarmonyOS 2/EMUI 10.1 or later), etc.

2

Reset button

Power on the router and wait for a moment (until the router completes the startup process). Use a needle or pin to press the Reset button on the router for approximately two seconds and release it until the indicator light goes out. Once the router reboots, its factory settings are restored.

3

Power port

Connect to power supply.

Avoid using power strips. Some power strips have EMI filters that may cause a Secondary router to be unable to connect to the network.

4

WAN/LAN auto-adaptive ports

The ports that connects to the Internet (e.g., a fiber optic modem/broadband modem/cable modem).

The ports that connect to network devices such as a computer.