How to improve the signal strength of the secondary router

Applicable products：
zoom in pic
How to improve the signal strength of the secondary router

If a secondary router has poor signal, change the Wi-Fi power mode from the default Standard to Max.

Scenario 1: The secondary router connects to a HUAWEI primary router using HarmonyOS Mesh+.

  1. Connect your computer to the router's Wi-Fi network (or to the router's LAN port using an Ethernet cable). In the browser's address bar, enter 192.168.3.1 and log in to the router's web-based management page.
  2. Click Manage Device. On the displayed page, locate and click the secondary router.

  3. When prompted, enter the router's login password and log in.

  4. Click My Wi-Fi. Set Wi-Fi power mode to Max and click Save.

Scenario 2: The secondary router connects to a non-Huawei primary router using a network cable or in Wi-Fi repeater mode.

  1. Connect your computer to the secondary router's LAN port. In the browser's address bar, enter 192.168.3.1 and log in to the router's web-based management page. If the login fails, go to step 2. If the login is successful, go to step 3.
  2. Set the computer network adapter to a static IP address in the 192.168.3.* network segment. In the browser's address bar, enter 192.168.3.1 and log in to the router's web-based management page.

  3. When prompted, enter the router's login password and log in.

  4. Click My Wi-Fi. Set Wi-Fi power mode to Max and click Save.

Helpful or not?
Yes No
Thanks for your feedback.