Overview of the calibration feature on HUAWEI styluses

Applicable products:
zoom in pic
Overview of the calibration feature on HUAWEI styluses

When the stylus is used on a tablet with protective film attached, the lines that you draw may not be perfectly straight. You can use the calibration feature to straighten these lines.

 
  • This feature is applicable to the following tablets: MatePad Pro 12.2-inch 2024, MatePad 11.5"S, MatePad Pro 13.2-inch, MatePad Air, MatePad 12 X, MatePad Pro 2022 (11-inch/12.6-inch), MatePad 11-inch 2023, and MatePad Pro 11-inch 2024.
  • Before using this feature, please update your device to its latest version.
  • When using this feature, make sure that the tablet is not being charged, and that the calibration area is at least 2 cm away from the edge of the screen.
  • Avoid touching the tablet when drawing circles, and keep the stylus perpendicular to the tablet.
  • A worn out pen tip cover or pen tip may also distort the lines that you draw. It is not recommended that you use a pen tip cover to protect your screen. If the pen tip is worn out, remember to replace the old tip with a new one.
  • You can also use this method to straighten your lines when there is no protective film attached to your tablet.
  1. Open any writing screen, for example, a note in Notepad.
  2. Use the stylus to draw circles clockwise for at least 3 seconds. The diameter of the circles should be greater than 3 cm.
  3. Once you're finished drawing, you can test the line effects on the current screen. If the line effects are still unsatisfying, try drawing the circles faster and for a longer period of time, to calibrate the line once again.

Helpful or not?
Thanks for your feedback.