Dive settings on your HUAWEI WATCH Ultimate Series
Applicable products：
zoom in pic
Dive settings on your HUAWEI WATCH Ultimate Series

General settings

You can set Auto-start dive and Auto-end dive as needed.

  1. Press the Up button to enter the app list, and touch Workout.
  2. Swipe up or down on the screen to find and select Diving. Touch to its right to access the settings screen.
    • Enable or disable Auto-start dive to suit your needs. When enabled, you can set Auto-start depth and Default mode.

      Auto-start dive is disabled by default.

    • Enable or disable Auto-end dive to suit your needs. When enabled, you can set Surface delay time.

    Auto-start depth: The default value is 1.2 m. If you haven't started a workout session, your watch will automatically start a diving session when you dive deeper than 1.2 m.

    Default mode: This will default to the most recent diving mode, and can be set manually.

    Surface delay time: If you do not dive again and trigger the diving feature within 30 minutes of the last dive, the diving session will automatically end.

Before each dive, check the diving settings and device battery level, and manually select and enter a diving mode. You can check the diving mode icon on the diving data home screen, to make sure that the device is working as normal.

Diving modes

Your watch supports Recreational dive, Freedive, Technical dive, and Gauge. Each diving mode supports settings, real-time monitoring of diving data, surface time, and diving log generation and syncing after dives. Your watch also supports apnea training and apnea tests to help you train.

  • Recreational dive: No-decompression diving with nitrogen and oxygen mixtures. This diving mode includes safety stop guidance.
  • Freedive: Breath-hold diving.
  • Technical dive: Technical decompression diving with multiple cylinders containing helium, nitrogen, and oxygen mixtures. This diving mode does not include safety stop guidance.
  • Gauge: This diving mode works like an underwater timer and displays only the depth and time. It does not provide information tracking or decompression calculations.

For each diving mode, you can set the parameters to suit your needs.

  1. Press the Up button on the watch to open the app list, and go to Workout > Diving.
  2. Touch the icon on the right of each diving mode to access the corresponding settings screen.
    • Recreational dive: You can set Gas, Water type, Difficulty level, Max PO2, Safety stop duration, Reminders, Alerts, and Notification method.
    • Freedive: You can set Water type, Reminders, Alerts, and Notification method.
    • Technical dive: You can set Gas, Water type, GF, Oxygen partial pressure limit, Bottom depth, Reminders, Alerts, and Notification method.
    • Gauge: You can set Water type and Notification method.
Helpful or not?
Yes No
Thanks for your feedback.