Measure Height

In the Tools folder on your home screen, touch HUAWEI AR Measure and select Height or go to People > (depending on your device model) to measure height automatically or manually.

If the icon cannot be found in the viewfinder, it means that your phone does not support automatic height measurements.

Manually measure height

1. If your phone supports automatic measurements, touch to disable auto mode first. Frame the subject's feet in the viewfinder and slowly move your phone to locate the plane.

2. When the plane is identified, move your phone to point at the subject's feet and touch to add a starting point.

3. Slowly move your phone upward until the camera points at the subject's face. When the subject's face is identified, your phone will automatically display the subject's height.

4. Drag the end point to fine-tune the measurement result.

Touch to take a photo of the subject and the measurement result.

To manually measure the height of two or three people at the same time, get them to stand side by side, then mark the feet of one subject as the starting point. Lift your phone until your subjects' faces have been identified, at which point their individual heights will be displayed.

Automatically measure height

1. On a phone that supports automatic height measurements, touch and make sure that auto mode is enabled. Frame the subject's feet in the viewfinder and slowly move your phone to locate the plane.

2. When the plane is identified, follow the onscreen instructions and slowly move your phone upward until the camera points at the subject's face. When the subject's face is identified, your phone will automatically display the subject's height.

Touch to take a photo of the subject and the measurement result.

Measure Length

1. On the HUAWEI AR Measure screen, go to Objects > or touch Length.

2. Frame the surface on which the object is resting in the viewfinder and slowly move your phone to locate the plane.

3. Move your phone to point at one end of the object and touch to add a starting point.

4. Move your phone slowly so that travels along the edge of the object until it reaches the end. Touch to complete the measurement.

5. Your phone will automatically display the result.

   Drag the end points to fine-tune the measurement result.

For best results, keep a distance of 0.3–1.5 m (about 1–5 ft.) between your phone and the object.

Measure Area

Currently, only the area of rectangles can be measured.

1. On the HUAWEI AR Measure screen, go to Objects > or touch Area.

2. Frame the surface on which the object is resting in the viewfinder and slowly move your phone to locate the plane.

3. When your phone identifies the plane of the object, it will automatically display a frame that matches the size of the plane. When the frame matches the size of the plane, touch .

4. Your phone will automatically display the result.

   Drag the tips of the object to fine-tune the measurement result.

Measure Volume

On the HUAWEI AR Measure screen, go to Objects > or touch Volume. Both automatic and manual measurements are supported.

 

• If the icon cannot be found in the viewfinder, it means that your phone does not support automatic volume measurements.

• Currently, only the volume of cubes and cuboids can be measured.

• Make sure the object is not placed against a wall and there is a distance of 1 to 1.5 m (3.3 to 5 ft.) between your phone and the object.

Manually measure volume

1. If your phone supports automatic measurements, touch to disable auto mode first. Frame the surface on which the object is resting in the viewfinder and slowly move your phone to locate the plane.

2. When the plane is identified, move your phone to point at the object's bottom edge and touch to add a starting point.

3. Move your phone slowly so that travels along the long edge of the object until it reaches the end. Then touch .

4. Move your phone to create a frame for the bottom of the object. When the frame matches the bottom length and width of the object, touch .

5. Move your phone to create a frame for the whole object. When the frame matches the size of the whole object, touch .

   Your phone will automatically display the result.

6. Drag the tips of the object to fine-tune the measurement result.

Automatically measure volume

1. On a phone that supports automatic measurements, touch and make sure that auto mode is enabled. Frame the object in the viewfinder and slowly move your phone to locate the plane.

2. When your phone identifies the plane and recognizes the object, a frame will be displayed automatically. Then touch .

   Your phone will automatically display the result.

3. Drag the tips of the object to fine-tune the measurement result.