Setting the OSD menu of the monitor

Applicable products：
zoom in pic
Setting the OSD menu of the monitor
  1. When the monitor is powered on, connect the monitor to an external device in wired or wireless projection mode. When the monitor displays the screen of the external device, tap the HUAWEI Smart Bar with one finger to open the OSD menu.
  2. Set the OSD menu by following the instructions on the gestures of the HUAWEI Smart Bar.
  3. After finishing setting the OSD menu, double-tap the HUAWEI Smart Bar to exit the OSD menu. Alternatively, wait a moment for the OSD menu to automatically exit.

OSD menu descriptions

The OSD menu varies depending on the monitor model.

Enables or disables Eye Comfort mode.

It is recommended that you enable Eye Comfort mode if you are going to read for a long time. After Eye Comfort mode is enabled, it is normal that the screen has a yellow cast.

Adjusts the brightness.

Switches the input source.

Switches the color gamut.

Enables or disables power saving mode.

Only HSN-CBA monitors support power saving mode.

Adjusts the volume of the speaker and microphone.

Adjusts the display settings of the monitor.

Switches the language of the OSD menu on the monitor.

Restores the OSD menu of the monitor to factory settings.
Helpful or not?
Yes No
Thanks for your feedback.