Update the firmware of a HUAWEI laser printer

Applicable products:
zoom in pic
Update the firmware of a HUAWEI laser printer

If a new firmware version is available for your HUAWEI laser printer, you can update the firmware on the device connected to the printer.

 
  • You can only update the printer firmware via the HUAWEI AI Life app or Huawei PC Manager.
  • When updating the firmware, keep the printer powered on. Do not power off the printer.
  • During the update, the number key on the printer panel flashes in a circular pattern . After the firmware update is complete, the printer automatically restarts. After the restart is complete, wait until the number key displays 01.
  • HUAWEI PixLab X1 is used as an example.

Phone/Tablet: Updating the printer firmware via the HUAWEI AI Life app

After connecting your phone/tablet to the printer via the HUAWEI AI Life app, tap the printer card to manually or automatically update the firmware.

  • Manual firmware update
    • Method 1: If a red dot is displayed on Firmware update, there is a new firmware version. Tap Firmware update. After a new firmware version is detected, tap UPDATE and follow the onscreen instructions to complete the update.

    • Method 2: Manually update the device by accessing the Device information screen.

      This method is applicable only to HarmonyOS and Android devices. iOS devices do not support this method.

  • Auto firmware update
    • HarmonyOS/Android

      Tap the four-dot icon in the upper right corner, tap General, and enable Auto-update. When a new firmware version is available and the device is idle, the firmware will be automatically downloaded and installed, and the printer will restart.

    • iOS

      Tap the four-dot icon in the upper right corner, tap Setting, and enable Auto Update. When a new firmware version is available and the device is idle, the firmware will be automatically downloaded and installed, and the printer will restart.

HUAWEI Windows computer: Updating the printer firmware using Huawei PC Manager

Certain HUAWEI Windows computers can connect to the HUAWEI laser printer via Huawei PC Manager through a local area network (LAN). You can click My devices, click the printer card, and manually or automatically update the firmware.

  • Manual firmware update: Click Firmware update. If a new firmware version is detected, follow the onscreen instructions to complete the update.

    If the printer is connected to your computer using a USB cable, Firmware update is unavailable on the printer card in Huawei PC Manager.

  • Auto firmware update: Click the four-dot icon in the upper right corner, click Settings, and enable Auto-updates. When a new firmware version is available and the device is idle, the firmware will be automatically downloaded and installed, and the printer will restart.

To learn more

Unpacking the printer

Configure the network for a HUAWEI laser printer using a mobile phone, tablet, or computer

Connect other phones, tablets, or computers to a HUAWEI laser printer that has been connected to the Internet

Helpful or not?
Thanks for your feedback.