Installing and removing the HUAWEI WATCH Buds Series strap
请选择
| Installing and removing the HUAWEI WATCH Buds Series strap |
HUAWEI WATCH Buds 2 (Quick release button)
|
❶ |
Spring bar |
|
❷ |
Spring bar hold |
|
❸ |
Quick release button |
|
❹ |
Spring bar guide slot |
Remove the strap: Press the Quick release button as far as it will go and the spring bar rod will retract. Then pull out the strap to remove it.
Install the strap: Insert one end of the strap obliquely into a spring bar slot, align the other end with the guide slot, and gently press the Quick release button while pressing down the strap to install it. Pull at the strap to make sure it doesn't fall out, meaning it's properly installed.
HUAWEI WATCH Buds (spring bar lever)
Remove the strap: Move the springbar lever on the strap. Tilt the strap outwards and remove it from the fixing slot on the watch body.
|
❶ |
Springbar lever |
Install the strap: Align one side of the springbar pin with the fixing slot. Move the springbar lever on the other side to make the pin draw back and then push into the slot.
|
❶ |
Springbar pin |