How do I access the web-based management page of my secondary router in HarmonyOS Mesh+ mode?
Applicable products：
zoom in pic
How do I access the web-based management page of my secondary router in HarmonyOS Mesh+ mode?

When a HarmonyOS Mesh+ connection is established between two routers, the LAN IP address of the primary router is still 192.168.3.1, but the LAN IP address of the secondary router will be modified to 192.168.4.1 automatically. To access the web-based management page of your secondary router, use the following methods:

Method 1: LAN IP address access

  1. Connect your computer to the LAN port of the secondary router using an Ethernet cable.
  2. Set the IP address of your computer to 192.168.4.* ("*" as any integer from 2 to 254).
  3. Open your Internet browser. Enter 192.168.4.1 in the address bar and press Enter to access the web-based management page of your secondary router.

Method 2: WAN IP address access

  1. Connect your computer to the LAN port of the primary router using an Ethernet cable.
  2. Log in to the web-based management page of your primary router (192.168.3.1 by default).
  3. Click Manage Device to view the WAN IP address of your secondary router (as shown in the following figure: 192.168.3.15).
  4. To access the web-based management page of your secondary router, click the IP address of the secondary router on the page (or enter the WAN IP address of the secondary router in the browser's address bar, for example, 192.168.3.15).

Helpful or not?
Yes No
Thanks for your feedback.